1. Home
  2. Epoxy Finishes
  3. Polyaspartic Top Coats

Polyaspartic Top Coats Over Epoxy

A UV-resistant polyaspartic top coat over a ground and primed epoxy system. Standard on every garage floor we coat, recommended for basements and businesses.

Glossy top coat over flake epoxy, close up
Close-up of black, white and gray flake under a glossy top coat

Standard on every garage

What a polyaspartic top coat does.

A polyaspartic top coat is a UV-resistant layer applied over the epoxy system. It helps keep the floor from yellowing and adds a protective layer over the finish underneath.

We make it standard on every garage floor we coat, because skipping it defeats the purpose of a floor that is built to last.

It is one part of the system, not a floor on its own. Compare every finish it goes over on our epoxy floor finishes and polyaspartic top coats page.

Polyaspartic or polyurea?

Same family, two names.

The polyaspartic we use is also commonly called a polyurea. Polyaspartic is a type of aliphatic polyurea, and installers and manufacturers use the two names interchangeably.

Classic polyurea cures in seconds and has to be sprayed with special rigs. Polyaspartic is the version formulated to roll on by hand, so it goes down evenly over a whole floor and still cures fast. If another quote says “polyurea top coat,” it is this family of coating.

  • Stays clear in the sun It is aliphatic, so UV light does not turn it amber the way epoxy yellows. Right for garages, porches and sunrooms.
  • Cures fast It hardens much faster than an epoxy top coat, so the job finishes sooner and your space is back in use sooner.
  • Shrugs off hot tires Built to resist hot-tire pickup, the classic way cheap garage coatings peel in the summer.
  • Tough and a little flexible Hard enough for grit, dropped tools and daily wear, with enough give to handle impact without chipping.
  • Salt and chemical resistant Road salt, oil, gas and brake fluid sit on top and wipe up instead of soaking in.
  • Goes on in cold weather Cures at lower temperatures than epoxy, which matters in a Chicago spring and fall.
  • High gloss, crisp flake A clear, deep gloss that makes flake and metallic finishes pop and cleans with a mop or hose.

Why ours

The top coat is only as good as the system under it.

Plenty of companies say polyaspartic or polyurea. Here is what you get with ours.

  1. A full system, not just a clear coat The top coat goes over a diamond-ground slab and a full epoxy base. A great top coat over bad prep still fails.
  2. Professional-grade, applied by the crew that preps Not a big-box clear coat or a one-coat kit. The same crew grinds, repairs, coats and top coats your floor.
  3. On every garage, already in the price We do not upsell it. Every garage floor we coat gets a polyaspartic top coat, and it is in your estimate from the start.
  4. Matched to the room everywhere else Basements, whole-home projects and commercial floors get the UV-resistant top coat that fits the traffic and budget.

By room

The right top coat for the space.

01

Garages

Polyaspartic, standard and included in every garage floor estimate.

02

Basements

Polyaspartic, or a thinner UV-resistant top coat.

03

Whole-home projects

A budget-friendly UV-resistant top coat across larger areas.

04

Commercial interiors

Recommended in your quote, matched to traffic and use.

Recent work

Floors we have finished.

Flake epoxy finished cleanly at the slab edge Flake epoxy finished cleanly around a floor pipe Detail of a finished flake epoxy floor Red, white and gray flake blend under a glossy coat Custom star logo set into a flake epoxy floor Flake epoxy garage floor up close

Questions

Straight answers.

Still deciding? Call or text (224) 321-2395 and talk to the people who will actually do the work.

Polyaspartic vs. epoxy: which does my floor need?

It is not an either-or choice. On our floors, epoxy is the base system: it bonds to the prepared concrete and carries the flake, metallic or solid color. Polyaspartic is the UV-resistant top coat that goes over it.

Is the polyaspartic top coat included in my estimate?

On garage floors, yes. A polyaspartic top coat is standard on every garage floor we coat. For basements, living spaces and commercial floors, we recommend polyaspartic or another UV-resistant top coat when we quote the project.

Why does an indoor floor need a UV-resistant top coat?

Sunlight is not the only thing that yellows epoxy. Ordinary indoor lighting does it too over time, so basements and commercial interiors still need UV protection.

Is polyaspartic the same as polyurea?

Polyaspartic is a type of aliphatic polyurea, and the names are often used interchangeably. Classic polyurea cures in seconds and is sprayed with special equipment; polyaspartic is the version formulated to roll on by hand, so it can be laid evenly over a floor and still cure fast. If a quote says polyurea top coat, it is the same family of coating we use.

Polyaspartic top coat

Why every garage floor we coat gets a polyaspartic top coat

A polyaspartic top coat is the clear top layer that protects an epoxy floor. Compared with a basic epoxy top coat, polyaspartic cures much faster, stays clear instead of yellowing in sunlight, and handles hot tires, road salt and temperature swings better.

That is why it is standard on every garage floor we coat, and the top coat we recommend for patios, porches and any floor that sees sun. Over a flake epoxy base it locks in the chips and gives the floor its gloss and stain resistance.

Polyaspartic and epoxy coatings are priced together as one system, from a free on-site assessment.