- Home
- Epoxy Floor Coatings
- Naperville
Epoxy Flooring in Naperville, IL
Epoxy and polyaspartic coatings for Naperville garages, basements, patios and businesses, with every slab ground, repaired and moisture-tested first.


Naperville slabs
Epoxy built for older slabs and new builds.
Older garage and basement slabs need diamond grinding, crack and spall repair, and a moisture test before any coating goes down. New-construction slabs need the opposite kind of attention: time to cure, usually about 28 days, and a moisture test.
We check which slab you have and prep for it, then finish every garage floor with a polyaspartic top coat.
Cost
What it costs.
For the most common project, a standard 2-car garage of about 400 to 500 square feet typically runs roughly $2,500 to $4,000 installed , depending on the system and how much prep the slab needs.
Every price is all-in with surface prep, base coat and top coat, and your free estimate gives you the exact figure. Per-square-foot ranges for each system are in our cost guide.
Service area
Naperville and all of Chicagoland.
We serve Greater Chicagoland, from the Lake Michigan shoreline west to Rockford, south to Naperville, and north to the Wisconsin border.
Questions
Naperville epoxy FAQs.
Still deciding? Call or text (224) 321-2395 and talk to the people who will actually do the work.
Do you install epoxy floors in Naperville?
Yes. We install epoxy and polyaspartic floors across Naperville, on both the DuPage County and Will County sides of the city, and in neighboring Aurora, Lisle, Warrenville, Bolingbrook and Plainfield. Every job starts with a free on-site estimate.
What does an epoxy garage floor cost in Naperville?
A standard 2-car garage typically runs about $2,500 to $4,000 installed for a flake floor, depending on how much repair the slab needs. We price from an on-site assessment, not a phone quote. Our epoxy flooring cost guide breaks down what moves the number.
Does my Naperville HOA need to approve an epoxy garage floor?
Usually not. HOA covenants in Naperville subdivisions mostly cover what neighbors see from the street, such as exterior colors, driveways and fences, and an interior garage or basement floor is rarely on that list. Porches, front steps and patios are visible from outside, so if your HOA reviews exterior changes, check with them before we coat those. We are happy to send photos and product information for an HOA submission.
Do I need a city permit for a garage floor coating in Naperville?
A coating applied to an existing slab is a surface finish, not structural or electrical work, so it typically does not need a building permit. Pouring a new slab or replacing concrete is different. If you are unsure about your project, the City of Naperville's permit desk can confirm before we schedule.
Our Naperville home is newer. Can you coat a new or nearly new garage slab?
Yes, once it is ready. Brand-new concrete has to cure, usually about 28 days, and pass a moisture test before it can be coated. Slabs in newer subdivisions are often smooth and dense, so we diamond-grind them to open the surface; a coating will not bond properly to a slick, unground slab.
Our home is older, near downtown Naperville. Can an older garage or basement floor still be coated?
Almost always. Older slabs usually need more prep: grinding off paint or sealers, repairing cracks and spalling, and testing for moisture before anything goes down. That repair work is part of your estimate, so you see the full price before we start.
How long will my garage be out of use?
Most residential floors take one to two days to install. Foot traffic is usually fine after about 24 hours and cars after a few days, depending on the system and the weather. We confirm the exact timeline at the final walkthrough so nothing gets driven on too early.
Will the floor hold up to road salt and Naperville winters?
Yes. A properly installed system seals the slab so snow melt and road salt cannot soak in and freeze, which is the main way garage floors in the western suburbs crack and flake. The polyaspartic top coat resists salt and hot tires and cleans with a hose. See our floor care guide for winter upkeep.
Can you coat a Naperville basement floor?
Yes, after a moisture test. Basement slabs can carry moisture from below, and a coating will not hold on a slab that is pushing water up. If yours passes, we grind, repair and coat it like a garage; if it does not, we tell you before any work starts and walk you through the options. See epoxy for damp and older basements.
Will an epoxy floor be slippery?
A flake floor has a light texture that gives good grip, and we can add an anti-slip additive to the top coat for garages, steps and wet areas. Solid and metallic floors are smoother, so we recommend the additive anywhere water or snow comes in.
Why not use a DIY epoxy kit from the hardware store?
Most DIY kits go on as a thin coat over concrete that has only been cleaned, which is why they often peel under hot tires within a year or two. A professional system starts with diamond grinding and crack repair, then a full base coat and a UV-stable top coat. The difference shows up in how long the floor lasts.
What finishes can I choose for my Naperville floor?
Flake is the most popular choice for garages, and we carry more than 550 colors in our flake color catalog. Basements and showrooms often get solid color or metallic epoxy. See epoxy finishes, or try colors on a photo of your own floor with our floor visualizer.
Epoxy flooring Naperville
Naperville epoxy flooring and garage floor coating
Fine Services installs epoxy flooring in Naperville for garages, basements, patios and commercial spaces. For Naperville garages, a flake epoxy floor with a polyaspartic top coat is the most popular upgrade.
We diamond-grind every slab, repair cracks and check for moisture before coating, so the floor bonds and lasts through Chicago-area winters. Finished basements are a good fit for metallic epoxy.
Every Naperville epoxy floor is priced from a free on-site assessment. We are licensed, insured and rated 5.0 on Google.






