- Home
- Epoxy Floor Coatings
- Cost
Epoxy Flooring Cost in Chicago: What You Will Actually Pay
Epoxy flooring cost in Chicago usually runs between about $6 and $18 per square foot installed, depending on the coating system you choose and the condition of your concrete. Below are typical price ranges by system, what moves your number up or down, and how to get an exact quote for your garage, basement, or commercial floor.

Epoxy Flooring Cost per Square Foot
A professional epoxy floor is priced as a complete system, not a can of product. The ranges below are typical installed prices for the Chicago market, all-in with surface prep, base coat, and top coat. They are ranges, not a quote: your free estimate gives you an exact figure for your space.
| System / finish | Typical installed range (per sq ft) | Best for |
|---|---|---|
| Solid color epoxy | $8 to $12 | Garages, basements, utility spaces |
| Flake (Chip) System | $6 to $8 | Garages, basements, most residential |
| Metallic / designer | $10 to $18 | Showrooms, salons, high-end living space |
| Solid color industrial / commercial | $6 to $10 | Warehouses, retail, light-industrial |
For the most common project, a standard 2-car garage of about 400 to 500 square feet typically runs roughly $2,500 to $4,000 installed for a flake floor, depending on how much prep the slab needs.
Polished concrete and grind and seal
Polished concrete is priced by how far we take the slab: grind and seal at the low end, then each polishing level adds grinding steps and sheen. Exposing the full aggregate or adding dye or stain is the top of the range. See concrete polishing and grind and seal vs. polished concrete.
| Finish | Typical installed range (per sq ft) | Best for |
|---|---|---|
| Grind and seal | $2 to $5 | Garages, basements, warehouses that need a sealed, dust-free slab |
| Polished concrete, level 1 (flat / cream) | $3 to $5 | A clean, low-sheen finish that keeps the surface cream |
| Polished concrete, level 2 (satin) | $4 to $6 | Warehouses and shops that want some reflection |
| Polished concrete, level 3 (semi-gloss) | $5 to $8 | Retail, offices and showrooms |
| Polished concrete, level 4 (high gloss) | $8 to $12 | Showrooms, lobbies and high-end interiors |
| Full aggregate exposure or dye / stain | $15 to $18 | Decorative floors with exposed stone or color |
Project minimum: $2,500. The grinders, dust extraction and crew cost the same to bring out for a small floor as a big one, so small jobs are priced at the minimum.
What Affects the Cost of an Epoxy Floor
Concrete condition
cracks, pitting, oil stains, and prior coatings or sealers all need to be addressed before coating, and on older Chicago slabs this is usually the biggest cost variable.
Surface preparation
we mechanically grind every floor rather than relying on a light acid etch. Grinding takes more time, but it is what lets the coating bond and survive Chicago freeze-thaw cycles.
Square footage
a larger floor costs more in total but often less per square foot, from a single-car garage to a full warehouse.
Finish system
a solid color is the most economical, a flake system sits in the middle, and metallic, designer, and custom finishes cost the most because they take more material and more hand-applied skill. Compare them on our epoxy finishes page.
Top coat
every garage floor gets a polyaspartic top coat as standard, and it is included in your garage estimate. Basements, living spaces, and commercial interiors still need UV protection, since indoor lighting yellows epoxy too, so we recommend polyaspartic or a thinner UV-resistant top coat when we quote the project.
Moisture and access
damp basements may need extra prep, and any active water intrusion has to be resolved before a coating goes down. Tight or hard-to-reach spaces can also add time.

Epoxy Garage Floor Cost
Garages are the most common epoxy project in Chicago, and their cost is shaped by the same winters that make a coating worth having. Road salt and roughly 80 to 100 freeze-thaw cycles a year leave many bare garage slabs pitted, cracked, and stained, and that damage has to be repaired before coating. A standard 2-car garage typically runs roughly $2,500 to $4,000 installed. Most homeowners choose a flake system for the garage because it adds grip and hides tire marks and minor imperfections. Every garage floor we coat is finished with a polyaspartic top coat, so the UV-resistant protection is part of the price from the start. See our residential epoxy flooring page for garage and basement options.
Basement and Commercial Epoxy Flooring Cost
Basement floors are priced around moisture. Many Chicago homes, especially older bungalow-belt properties, were built with little original moisture protection, so we check the slab before recommending a system. Commercial floors are priced around square footage, the finish system, and scheduling: installs that need to work around operating hours or a tight reopening window are staged to match. Learn more on our commercial epoxy flooring page.


Is Epoxy Flooring Worth the Cost?
For most Chicago garages and basements, yes. A professionally installed epoxy floor seals the concrete against moisture, road salt, and freeze-thaw damage, cleans up with a sweep and a mop, and turns a bare slab into a finished space. The value comes from the prep. A DIY kit rolled onto lightly cleaned concrete costs less upfront but often starts lifting within a season or two, while a properly ground, repaired, and top-coated floor is built to last for years. When you compare prices, compare the full system, not just the finish.
How to Get an Accurate Epoxy Flooring Quote
An exact price needs three things
the square footage, the current condition of your concrete, and the finish you want. We gather all three during a free on-site assessment, check the slab for cracks, moisture, and old coatings, and recommend the right system and top coat for your space. You get a clear estimate for the complete job, including prep, before any work is scheduled, with no surprises once the work starts.
Get Your Free Epoxy Flooring Quote
Tell us about your space and the finish you have in mind. We will assess the floor and give you a clear price for the complete system.
Questions
Epoxy Flooring Cost FAQs
Still deciding? Call or text (224) 321-2395 and talk to the people who will actually do the work.
How much does epoxy flooring cost per square foot?
Most Chicago epoxy floors run about $6 to $18 per square foot installed, all-in with prep, base coat, and top coat. Flake systems run about $6 to $8, solid color about $8 to $12, commercial solid color about $6 to $10, and metallic and designer finishes are highest at about $10 to $18. The biggest variable is the condition of your existing concrete, since cracks, pitting, and moisture add prep work. Our cost calculator gives you a range for your square footage, and a free estimate gives you an exact figure for your space.
How much does it cost to epoxy a 2-car garage?
A standard 2-car garage of about 400 to 500 square feet typically runs roughly $2,500 to $4,000 installed for a flake floor, depending on how much the slab needs before coating. A flake floor, our most popular garage system, usually lands in that range; solid color and metallic floors run higher. Repairing salt damage, cracks, or heavy oil staining adds to the total. Every garage floor we coat includes a polyaspartic top coat as standard, so that protection is built into your estimate rather than added later.
Does concrete repair add to the cost of an epoxy floor?
Yes. Cracks, pitting, spalling, and heavy staining have to be ground out and repaired before any coating goes on, and that adds labor and material to the job. It is also the step that decides whether the floor lasts, since coating over damaged concrete is one of the most common reasons an epoxy floor fails early. During your free estimate we check the slab and tell you exactly what repair your floor needs, so there are no surprises once work begins.
Why does professional epoxy flooring cost more than a DIY kit?
A DIY kit prices only the product in the box. A professional epoxy floor prices the full system: mechanical grinding, crack and surface repair, primer, base coat, your chosen finish, and a UV-resistant top coat applied by a trained crew. Most DIY kits go on as a thin coat over lightly cleaned concrete, which is why they often start lifting within a season or two. The higher upfront cost pays for prep and materials built to hold up for years.
What is included in a free epoxy flooring estimate?
A free estimate from Fine Services is an on-site assessment of your space. We measure the area, check the concrete for cracks, moisture, and old coatings or sealers, and talk through the finish you want. From there we recommend the right coating system and top coat and give you a clear estimate for the complete job, including prep. There is no obligation, and you know exactly what your floor needs before any work is scheduled.
Is there a minimum project size?
Yes. Every project has a $2,500 minimum. Our grinders, dust extractors and crew cost the same to bring out for a small floor as for a big one, so small jobs like a one-car garage, a landing or a set of steps are priced at the $2,500 minimum. Larger floors are priced by the square foot.
Epoxy flooring cost
What sets the cost of an epoxy floor in Chicago
Most residential epoxy flooring in the Chicago area runs about $6 to $18 per square foot. Where your floor lands in that range depends on the size of the space, the condition of the slab, and the system you choose.
Slab prep is the biggest variable: cracks, spalling, old sealers and moisture all add time. The finish matters next: flake epoxy with a polyaspartic top coat is the standard for garages, while hand-poured metallic epoxy costs more. Commercial floors and concrete polishing are priced per project.
We do not quote epoxy floor prices over the phone, because we would be guessing at the slab. We give you one clear, upfront price after a free on-site assessment.
Ready to Upgrade Your Home's Floors?
Turn a dull concrete garage or basement into a clean, durable, finished space. We will assess your slab, walk through your options, and give you a clear estimate with no surprises.






